POWERSHIELD® Engine Assembly Lube & Oil Booster
Part No. 4281K -12-ounce PVC container
Two Products in One:
Champion PowerShield Engine Assembly Lube & Oil Booster provides outstanding resistance to scuffing, wear and friction during hard break-in of new or rebuilt engines. Champion PowerShield is recommended for use on rocker arm fulcrum balls, needle bearings, roller tips or rocker shafts, timing chain sprockets and gears, roller lifters and roller camshafts, engine bearing surfaces, and outer surface of hydraulic or mechanical lifter bodies. Champion® PowerShield can also be used as an oil booster to replace the critical anti-wear additives that current API rated engine oils leave out. PowerShield® is highly concentrated with zinc-thiophosphates, sulfonates, and phenates that super-boost engine oil protection that prevent sludge formation and keep high performance engines running efficiently.
Engine Assembly Lube:
Failure to clean and lubricate parts properly during engine assembly is among the top reasons for premature engine failure in a newly rebuilt engine or low mileage failure. Camshaft lobes require a high-pressure engine assembly lube that will provide a tough film barrier until the engine is started and oil reaches the cam. Bearings and cylinders must be well coated to prevent a dry start. Champion® Power Shield Engine Assembly Lube & Oil Booster is favored by professional mechanics for assembling valvetrain components. It provides outstanding resistance to scuffing, wear and friction during critical break-in. Recommended for use on several different engine components, such as: rocker arm fulcrum balls, needle bearings, roller tips or rocker shafts; timing chain sprockets and gears; roller lifters and roller camshafts; engine bearing surfaces; outer surface of hydraulic or mechanical lifter bodies.
Directions:
Crank & Cam Bearings: Apply directly and liberally to bearings and journals prior to installing camshaft and crank.
Lifters: Apply to camshaft lobes. Dip base of lifters into product.
Oil Pump: Fill oil pump cavity with product to facilitate priming.
Engine Bores: Liberally coat engine bore with product prior to piston installation.
Piston, Ring & Wrist Pin Assembly: liberally coat piston sidewall, ring, and piston/rod wrist pin prior to piston installation.